How to Avoid Food Grade Conveyor Belt Tearing?

Basic Description

Food grade conveyor belt is widely used in the food industry, favored by enterprises. Because the food grade conveyor belt is made of polyurethane as the production raw materials, scientific and reasonable formula, non-toxic and odor free, oil resistant and easy to clean, it is a conveyor belt that fully meets the health standards of the United States FDA and can be in direct contact with food.

After the use of food grade conveyor belt for a long time, there will be a variety of small problems. Among them, the phenomenon of food grade conveyor belt tearing is also relatively common. What are the reasons for the tearing of food grade conveyor belt? How do you avoid tearing? Next, I'll give you a simple analysis.

Reasons for tearing of food grade conveyor belt:

1. The diameter of the drum is too small, the bending stress of the food grade conveyor belt is large, and in the course of time, there will be tearing phenomenon.

2. The joint quality of the food grade conveyor belt is poor, and the canvas layer is cut or polished off when the glue is connected, which leads to the reduction of the strength of the joint and easy tearing.

3. The food grade conveyor belt is stuck after serious deviation.

4. The working cycle of conveying equipment is short, the start-up is frequent, and the instantaneous tensioning force is large.

How do you avoid tearing?

1. When the service life of the food grade conveyor belt reaches its service life, it should be replaced with a new food grade conveyor belt immediately.

2. When the food grade conveyor belt deviation, should be taken timely measures to correct.

3. For materials with large transportation wear, the blanking speed should be reduced as far as possible.

4. Choose the right type of food grade conveyor belt according to the application conditions and environment of the conveying equipment.

5. Use a new food grade conveyor belt to replace the damaged or deformed food grade conveyor belt.

The reason for the food grade conveyor belt tearing and how to avoid the phenomenon of tearing is introduced here first, I hope to help you. If you want the service life of the food grade conveyor belt to be longer, you also need regular maintenance and maintenance of the conveyor belt and conveying equipment.