The main difference between side edged belt conveyor and ordinary belt conveyor

Basic Description

The main difference between the skirt belt conveyor and the ordinary belt conveyor is the rubber belt and its supporting rollers. It is mainly composed of a base belt, a skirt and a transverse partition. The skirt is bonded with the base belt, and the outer side of the skirt is reinforced. The structure makes it have greater support strength and horizontal and vertical stability coefficients. The upper part of the skirt has good flexibility, so that when the belt is bent, it can be stretched and compressed more. The transverse partition is divided into detachable and fixed types.

There are two types of detachable diaphragms that are fixed to the base belt by mechanical methods. They have a variety of structures. Most of them are glued to the base belt by cold bonding, which can be used in industrial and mining situations less than forty degrees and greater inclination. Due to the particularity of the structure of the skirt conveyor belt, there are special requirements for the structure of the roller. The upper branch can use the national standard parallel roller, and the lower parallel roller adopts composite rollers and rollers to support the skirt. The top, but this structure wears more serious to the skirt.

The line body of the skirt belt conveyor can increase the transportation angle, up to about eighty-five degrees, which saves the equipment area. Due to the addition of the skirt, the transmission capacity can be greatly improved because of the steel of the rubber conveyor belt. Enhanced performance, and avoids the problem of the deviation of the large-incline conveyor belt.