If the canvas layered conveyor belt cannot be installed in the correct way, there will be many problems in the process of use, which will cause damage, deviation, jamming and other undesirable phenomena. Once this phenomenon occurs , It will cause the transmission work to not work normally, so we hope that everyone can pay attention to the installation of the canvas layered conveyor belt and learn to install it correctly.
1. Pay attention to the working rubber surface and non-working rubber surface of the canvas layered conveyor belt, with the working rubber surface facing outward (the working surface is the thicker side of the surface rubber).
2. When attaching the new conveyor belt to the old conveyor belt, pay attention to the new and old conveyor belts to be parallel to prevent the canvas layered conveyor belt from running off.
3. Arrange personnel to guard in sections to prevent the canvas layered conveyor belt from scratching and scratching. Pay special attention to the installation method of the endless conveyor belt when the belt passes through the drum and the unloading port. The endless conveyor belt is a conveyor belt that has already been connected. This kind of conveyor belt is troublesome both in installation and replacement, and it is rarely used now. The specific method is to install the lower belt roller first, then spread the belt on the conveyor, install the drive roller, then install the bracket roller, and install the reversing roller. This is more suitable for the initial installation of the conveyor. Hoisting and replacing method above the conveyor. This method is to hoist the canvas layered conveyor belt to the top of the conveyor, use the electric roller of the conveyor to rotate, and install the belt on the conveyor. This method is more labor-saving, and whether it is a new conveyor belt installation , Or the old conveyor belt can be replaced.