For every production challenge, there is a solution – when you have the right partner. Whether you run a large quarry or a construction contracting business, we take your business personally.

1. Cold vulcanization joint process of conveyor belt

The most typical feature of the cold vulcanization process is that there is no equipment to heat and press it. It only relies on glue to connect the belt and the joint material. Therefore, the cold vulcanization joint has very high requirements for the selection of glue. The quality of the glue is very important for the joint. Quality will play a decisive role, what kind of glue should be used?

In the cold vulcanization process, glue plays a central role in the belt and the connecting material. High-quality glue has better adhesion and can determine the quality of the joint. Therefore, when choosing glue, the adhesion of the glue is very important.

After the conveyor belt passes through the cold vulcanization joint, if the glue is often opened during use, it will have an adverse effect on the life of the conveyor belt and the conveying system. Therefore, the construction personnel should also consider the continuous strength of the glue when choosing the glue.

2. On-site operation of cold joint of conveyor belt

1. First, the conveyor belts that need joints are treated in layers, and each layer is polished and cleaned;

2. Apply joint glue to the layered parts, apply it again after drying, and apply glue to the bonding surface of the repair strip;

3. Put the repair strip and the joint together, do the sealing treatment, and use the roller to roll back and forth to discharge the excess air.

The above is the introduction and process flow of the cold vulcanization joint of the conveyor belt. I hope it will be helpful to you.